科技與工程學院
Permanent URI for this communityhttp://rportal.lib.ntnu.edu.tw/handle/20.500.12235/5
沿革
科技與工程學院（原名為科技學院）於87學年度成立，其目標除致力於科技與工程教育師資培育外，亦積極培育與科技產業有關之工程及管理專業人才。學院成立之初在原有之工業教育學系、工業科技教育學系、圖文傳播學系等三系下，自91學年度增設「機電科技研究所」，該所於93學年度起設立學士班並更名為「機電科技學系」。本學院於93學年度亦增設「應用電子科技研究所」，並於96學年度合併工教系電機電子組成立「應用電子科技學系」。此外，「工業科技教育學系」於98學年度更名為「科技應用與人力資源發展學系」朝向培育科技產業之人力資源專才。之後，本院為配合本校轉型之規劃，增加學生於科技與工程產業職場的競爭，本院之「機電科技學系」與「應用電子科技學系」逐漸朝工程技術發展，兩系並於103學年度起分別更名為「機電工程學系」及「電機工程學系」。同年，本學院名稱亦由原「科技學院」更名為「科技與工程學院」。至此，本院發展之重點涵蓋教育（技職教育/科技教育/工程教育）、科技及工程等三大領域，並定位為以技術為本位之應用型學院。
107學年度，為配合本校轉型規劃，「光電科技研究所」由原隸屬於理學院改為隸屬本（科技與工程）學院，另增設2學程，分別為「車輛與能源工程學士學位學程」及「光電工程學士學位學程」。
News
Browse
5 results
Search Results
Item Three-Dimensional Measurement of a Remote Object with a Single CCD Camera(2009-02-12) Ti-Ho Wang; Chen-Chien Hsu; Chun-Wei Huang; Yu-Ching LuThis paper presents a novel method by regulating the height of a CCD camera to measure the width and height of a targeted object. That is, three-dimensional measurement can be obtained with the use of a single CCD camera. To facilitate the measurement using various kinds of CCD cameras, parameters pertinent to the cameras can be established via a proposed mechanism in this paper. As a result, any kinds of CCD cameras can be used to perform three dimensional measurement of a targeted object via software implementation of the proposed measuring method. No changes to the circuits or structure of the camera are required.Item 2-Dimenional Localization Based on Tilt Photographing of a Single CCD Camera(2009-02-12) Ming-Yu Cheng; Chen-Chien Hsu; Pei-Jun LeeThis paper provides an image-based localization method based on tilt photographing of a single CCD camera. Image captured by the CCD camera is pre-processing to locate the target object in the picture in terms of pixel count deviation from the CCD camera. By using an established formula based on relationship between tilt angle of the CCD camera and distance, coordinate of the target object can be calculated. Experiment results have demonstrated that the feasibility of the proposed approach with satisfactory accuracy in determining the position of the target object.Item A Practical Nighttime Vehicle Distance Alarm System(2008-10-15) Ming-Chih Lu; Wei-Yen Wang; Chen-Chien Hsu; Yin Yu Lu; Cheng-Pei TsaiThis paper presents a practical nighttime vehicle distance measuring method based on a single CCD image. The method combines an image-based distance measuring system. To solve the nighttime feature extraction problem, the proposed method uses two taillights as the feature. Based on the proportionality of similar triangles, distance between a CCD camera and the taillights of the vehicle ahead can be measured. The method focuses on detecting the taillights and differentiating the targeted vehicle from others on the basis of partial image analysis instead of whole image processing. The system is both fast and simple. The accuracy of the proposed method is demonstrated in this paper through experiences.Item Improvements and Applications of the Image-Based Distance Measuring System(2007-01-19) Ming-Chih Lu; Chen-Chien Hsu; Yin Yu LuThe paper presents practical improvements on the Image-Based Distance Measuring System, achieving the capability of 3-dimensional measurement of distant objects. The configuration of the proposed measurement is very simple, consisting of only a single CCD camera and two laser projectors formed in parallel. Because of the disposition of the laser projectors and the CCD camera, two laser-projected spots will appear on the same scan line of CCD images. Based on an established relationship between pixel counts and photographing distance, 3-D measurement and area information of distant objects can be obtained by using only one scan line in the image frame.Item Three-dimensional measurement of a remote object with a single CCD camera(2007-08-26) Cheng-chuan Chen; Chen-Chien Hsu; Ti-ho Wang; Chun-Wei HuangThis paper presents a novel method by regulating the height of a CCD camera to measure the width and height of a targeted object. That is, three-dimensional measurement can be obtained with the use of a single CCD camera. To facilitate the measurement using various kinds of CCD cameras, parameters pertinent to the cameras can be established via a proposed mechanism in this paper. As a result, any kinds of CCD cameras can be used to perform three dimensional measurement of a targeted object via software implementation of the proposed measuring method. No changes to the circuits or structure of the camera are required.